【作者】 亓海燕； 任来锁； 王宏霞； 王俊海； 张爽； 吴月龙；

【Author】 QI Haiyan;REN Laisuo;WANG Hongxia;WANG Junhai;ZHANG Shuang;WU Yuelong;Shandong Taishan Iron and Steel Group Co.,Ltd.;

【机构】 山东泰山钢铁集团有限公司；

【摘要】 含铜1.8%～2.2%的铁素体不锈钢经抗菌热处理后,能够在钢中析出细小弥散的ε-Cu富铜相,使不锈钢具有抗菌能力,但含铜量较高将导致铁素体不锈钢的热加工温度区间明显变窄,控制不当造成热加工开裂。本文通过研究含铜铁素体抗菌不锈钢的高温性能和组织,确定含Cu铁素体抗菌不锈钢具有较好的高温塑性,1200℃以上高温强度显著降低,当温度达到1200℃以上时由马氏体和铁素体两相组织转为单一的铁素体组织。更多还原

【Abstract】 Copper containing ferritie stainless steel 1.8 %～2.2 %.After antimicrobial heat treatment,it is able to precipitate small and diffuse ε-Cu rich copper phases in the steel,making stainless steel antibacterial.However,higher copper content will lead to a narrow temperature range of ferritie stainless steel,and improper control will cause thermal processing cracking.In this paper,by studying the high temperature properties and microstructure of copper-containing ferrite antibacterial stainless steel,it is determined that the Cu-containing ferrite antibacterial stainless steel has good high temperature plasticity and the high temperature strength above 1200℃ is significantly reduced.When the temperature reaches 1200℃ or higher,martensite is obtained.And two phase structure is transformed into a single ferrite structure.更多还原