节点文献

变形参数对镁合金组织性能的影响

The research for influence on microstructure and property of Mg-alloys of deformation parameter

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘奎立张治民张星

【Author】 LIU Kui-li ZHANG Zhi-min ZHANG Xing (North China Uinivercity of Science and Technology,Engineering Technology Research Center For Integrated Precision Forming of Shan Xi Province,Shan Xi 030051)

【机构】 华北工学院 山西省精密成型工程研究中心

【摘要】 研究了变形温度和变形程度对铸态AZ31镁合金组织和性能的影响。结果表明,在变形程度一定时,随着变形温度的升高,晶粒有长大的趋势;而在变形温度一定时,随着变形程度的增大,再结晶程度增加(ε=2.87时已全为再结晶组织),晶粒越细化,分布也越均匀;抗拉强度增量开始是逐渐增大的,但到一定程度时则出现峰值,以后不再增加。

【Abstract】 The influnce of deformation temperature and deformation etent on as - cast structure of AZ31 magnesium alloy are studied, show as a result,when deformation is certain,grains have tendency to grow large along with the increacement of deformation temperature;And when deformation extent(ε= 2.87 already is that recrystallization structure completely),the finer grain is,the more homogeneous distrabution is;It is increased gradually that the increment of tensile strength begin,but when going to certain level,arise peak value,not increase afterwards again.

【关键词】 AZ31镁合金铸造变形温度变形程度
【Key words】 castdeformation temperaturedeformation extent
  • 【会议录名称】 全国第十二届轻合金加工学术交流会论文集
  • 【会议名称】全国第十二届轻合金加工学术交流会
  • 【会议时间】2003-08-01
  • 【会议地点】中国黑龙江哈尔滨
  • 【分类号】TG146.21
  • 【主办单位】中国有色金属加工工业协会轻金属分会
节点文献中: