节点文献

溶胶-凝胶法制备TiO2-ADUN复合溶胶影响因素研究

Analysis on the factors affecting the preparation of TIO2-ADUN composite sol by sol-gel method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王辉尹荣才刘锦洪

【Author】 WANG Hui,YIN Rong-cai,LIU Jin-hong (Nation Key Laboratory for Nuclear Fuel and Materials,Nuclear Power Institute of China,Chengdu 610041,China)

【机构】 中国核动力研究设计院国家级核燃料与材料重点实验室

【摘要】 研究了用溶胶-凝胶法制备二氧化钛-ADUN(硝酸铀酰)复合溶胶的过程,着重研究制备二氧化钛溶胶的过程。以TBT(钛酸四丁酯)为前驱物,无水乙醇与水作为溶剂,硝酸为催化剂和稳定剂,分析了不同的反应条件对溶胶凝胶时间的影响。通过实验得到了制备透明稳定溶胶的条件为:反应温度在20~25℃范围内;HNO3加入量在0.3~0.5ml范围内;pH值为2~3;反应物的配比为:乙醇/TBT(摩尔比)为10,水/TBT(摩尔比)为2~3。把得到的钛溶胶加入到ADUN中,一次加入尿素,在低于5℃的体系中,缓慢均匀加入乌洛托品,不断搅拌下可以制得透明清亮的含钛ADUN复合溶胶。

【Abstract】 With C2H2O5 and water as solvent and TBT as precursor and HNO3 as the activator and valorize,the process for preparing TiO2-ADUN composite Sol method was studied.The influence of different reaction conditions on Sol-Gel time was analyzed in this study.The optimal reaction condition are:reaction temperature 20~25℃;pH value of reaction mixture 2~5;HNO3 value of reaction mixture 0.3~0.5ml;molar rations of alcohol to TBT 10,of water to TBT 2~3,respectively.A concentrated ADUN solution with Ti Sol,urea,water as additive is dispersed into uniform which are prepared by external miii.

【关键词】 TBT溶胶-凝胶TiO2-ADUN复合溶胶
【Key words】 TBTSol-GelTiO2-ADUN composite Sol
【基金】 中国核工业集团公司预先研究基金资助项目(61601090209)
  • 【会议录名称】 中国核科学技术进展报告——中国核学会2009年学术年会论文集(第一卷·第5册)
  • 【会议名称】“创新——核科学技术发展的不竭源泉”——中国核学会2009年学术年会
  • 【会议时间】2009-11-18
  • 【会议地点】中国北京
  • 【分类号】O614.411
  • 【主办单位】中国核学会
节点文献中: