节点文献

聚合硫酸铝铁处理双螺旋挤压浆制浆废液的研究

Treantment on pulping effluent of Twin Screw Extrusion with PAFS & PAM

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘廷志郑娥张瑞霞胡惠仁

【Author】 Liu Tingzhi Zheng E Zhang Ruixia Hu Huiren (Tianjin University of Science and Technology,Tianjin Key Laboratory of Pulp & Paper,Tianjin,300222)

【机构】 天津科技大学天津市制浆造纸工程重点实验室

【摘要】 研究了用聚硫酸铝铁(PAFS)和阳离子聚丙烯酰胺(PAM)为絮(助)凝剂, 处理木材下脚料双螺旋制浆废液,在 pH=10.5条件下,PAFS 用量为200ppm、搅拌转速为300转、搅拌时间为6分钟、PAM 用量为10ppm 时废液中 CODCr的去除率为60.8%, SS 的去除率达95%以上,处理后的废液用于原料的预浸处理,经过运行证明,通过 PAFS 和 PAM 处理,可实现制浆废液的循环回用。

【Abstract】 Accumulation of contaminate in the effluent of twin screw extrusion pulp was studied in the article.Wastewater can be reused and circulated after flocculating treatment with PAFS & PAM.CODCr,of the water reduced to15000 mg/l from45000 mg/l after treatment.

  • 【会议录名称】 中国造纸学会第十三届学术年会论文集(下)
  • 【会议名称】中国造纸学会第十三届学术年会
  • 【会议时间】2008-10
  • 【会议地点】中国北京
  • 【分类号】X793
  • 【主办单位】中国造纸学会
节点文献中: