【摘要】 小尺寸零件的表面积小、结构复杂，传统标志点拼接方法需要在零件表面人工粘贴标志点，导致表面的测量数据缺失出现孔洞。基于特征的点云拼接方法要求零件表面具有易区分的几何或距离特征，不适用于包含重复性特征的回转体零件。本文提出一种基于机械拼接的无标志点扫描测量方法，不需要粘贴标志点，不依赖于零件表面特征。首先，采用基于摄影测量的相机标定方法得到相机的高精度内外参数，重建标定板上靶点的高精度三维坐标，接着通过跟踪编码靶点的位置建立转台不同转角对应的旋转矩阵，进而解算出转轴方向向量和轴上定点坐标，实现转轴和相机的同步标定。在完成两个转轴位姿精确标定的基础上，利用转台转角构建旋转拼接矩阵，实现多视角点云粗配准。最后，基于法向迭代最近点算法(Normal Iterative Closest Point, NICP)完成点云的精配准。实验结果表明：使用靶点跟踪法标定后的两转轴夹角误差较传统的标准球拟合法低0.023°，标定后测量标准球的整体平均尺寸误差小于0.012 mm；在小尺寸零件自动化测量时，机械拼接方法在精配准后的点云拼接效果与标志点拼接方法相近，且拼接稳定性更高。机械拼接方法适用于无法粘贴标记点的小尺寸零件三维形貌测量场景。更多还原

【Abstract】 Small-size parts have a small surface area and complex structure. The traditional mark splicing method needs to manually paste marks on the surface of parts, resulting in missing the measurement data of the surface and becoming holes. The feature splicing method requires the surface of parts to have easily distinguishable geometric or distance features, which are not suitable for rotating parts containing repetitive features. We propose a scanning measurement method without marks based on mechanical splicing, which does not need to paste marks or depend on the surface features of parts. Firstly, the camera calibration method based on photogrammetry is used to reconstruct the high-precision three-dimensional coordinates of the target on the calibration board. By tracking the position of the coded target, the rotation matrix corresponding to different angles of the turntable is established, and the direction vector of the rotation axis and the fixed point coordinates on the axis are solved. Then the synchronous calibration of the rotation axis and the camera is completed. Secondly, based on the accurate calibration of poses of two rotation axes, the rotation mosaic matrix is constructed by using the turntable angle to realize the rough registration of multi-view point clouds. Finally, based on the Normal Iterative Closest Point(NICP) algorithm, the fine registration of the point clouds is completed. Experimental results show that the angle error between the two rotation axes calibrated by the target tracking method is 0.023° lower than that of the traditional standard ball fitting method. After calibration, the average size error of the standard ball is less than 0.012 mm. In the automatic measurement of smallsize parts, the point cloud splicing effect of the mechanical splicing method after fine registration is similar to that of the mark splicing method, and the splicing stability is higher. The mechanical splicing method is suitable for the 3D topography measurement of small-size parts where the marks cannot be pasted.更多还原