节点文献
CKA-PAA/MDE型吸水材料的制备及性能
Synthesis and properties of CKA-PAA/MDE type absorbent material
【摘要】 以风化煤腐植酸钾(CKA)、改性硅藻土(MDE)、丙烯酸(AA)为原料,过硫酸钾(KPS)为引发剂,N,N-亚甲基双丙烯酰(MBA)为交联剂,采用水溶液聚合法合成KHA-PAA/MDE农林型吸水材料,探究CKA、MDE、KPS、MBA用量(以AA计)对吸水倍率的影响,考察了其在土壤中的保水情况、重复吸水性能及硅藻土的添加与否对金属离子吸附率的影响。结果表明其最佳合成条件为:AA、CKA、MDE、KPS、MBA的用量分别为10 g,20%,10%,1. 6%,0. 3%,反应温度75℃,AA中和度65%。在此条件下其对蒸馏水与0. 9%的氯化钠溶液的吸收倍率分别为712倍和86倍。添加MDE后,其对Zn(Ⅱ)和Cu(Ⅱ)的吸附率分别达到了87%和75%,在40℃的条件下12 h,在土壤中的保水率仍可达到58%左右,且反复吸水性能良好。
【Abstract】 Using weathered coal potassium humate( CKA),modified diatomite( MDE) and acrylic acid( AA) as raw materials,potassium persulfate( KPS) was used as initiator N,N-methylenebisacrylamide( MBA) as crosslinking agent,KHA-PAA/MDE type absorbent material were synthesized by aqueous solution polymerization. The effect of the amount of CKA,MDE,KPS,MBA,on the water absorption rate was investigated,the water retention in the soil and the effect of repeated water absorption and the addition of diatomite or not on the adsorption rate of metal ions were also investigated. The results showed that the optimum synthesis conditions are as follows: the dosage of AA,CKA,MDE,KPS,MBA was 10 g,20%,10%,1. 6%,0. 3% respectively,the reaction temperature is 75 ℃,the neutralization degree of AA is65%,the absorption ratio of tap water and 0. 9% sodium chloride solution was 712 times and 86 times respectively under the optimum synthetic conditions. When addition diatomite the adsorption rate of Zn( Ⅱ) and Cu( Ⅱ) reached 87% and 75%,respectively,and the water retention rate of 12 h at 40 ℃ in soil was still about 58%,and the performance of repeated water absorption is good.
- 【文献出处】 应用化工 ,Applied Chemical Industry , 编辑部邮箱 ,2018年12期
- 【分类号】TQ324.8;TB34
- 【下载频次】121