节点文献

微波常压烧结制备SiC颗粒增强Al基复合材料研究

THE RESEARCH ON PREPARATION OF SiC PARTICLE REINFORCED Al MATRIX COMPOSTITE MATERIALS BY MICROWAVE ATMOSPHERIC PRESSURE SINTERING

推荐 CAJ下载
PDF下载
不支持迅雷等下载工具，请取消加速工具后下载。

【Author】 ZHOU Bo;ZHOU Jun-wen;XU Lei;ZHANG Li-bo;LIU Bing-guo;Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology;Joint Laboratory for Advanced Manufacturing Technology of Super Hard Materials;Key Laboratory of Unconventional Metallurgy,Ministry of Education;National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology;Yunnan Provincial Key Laboratory of Intensification Metallurgy,Kunming University of Science and Technology;

【机构】昆明理工大学冶金与能源工程学院；超硬材料先进制备技术联合实验室；非常规冶金教育部重点实验室；微波能工程应用及装备技术国家地方联合工程实验室；昆明理工大学特种冶金重点实验室；

【摘要】在不同的烧结温度(710,730,750,770,790℃)下,采用微波烧结法制备15%(vol)的SiC颗粒增强Al基复合材料。研究了烧结温度对SiC/Al复合材料的致密度、硬度和显微组织的影响。结果表明,当烧结温度为770℃时,SiC/Al复合材料的致密度和硬度均达到最大值。更多还原

【Abstract】 At different sintering temperature(710,730,750,770,790 ℃),the preparation of 15%(vol)SiC particle reinforced Al matrix composite materials by microwave sintering was studied.The influence of sintering temperature on density,hardness and microstructure of the SiC/Al composite materials were investigated.The result shows that at the sintering temperature of 770 ℃,both density and hardness of the SiC/Al composite materials reach the maximum value.更多还原

【关键词】 SiC颗粒增强铝基复合材料；微波常压烧结；致密度；硬度；
【Key words】 SiC particle reinforced aluminum matrix composite materials； microwave atmospheric pressure sintering； density； hardness；

【基金】国家高技术研究发展计划(863计划)(2015AA020201);国家自然科学基金项目(201567013);云南省应用基础研究计划项目(2015FB129);云南省教育厅科学研究基金重点项目(2013Z118);云南科技创新人才计划-科技领军人才(2013HA002);超硬材料先进制备技术国际联合研究中心(2013B01038)

【文献出处】矿冶 ,Mining and Metallurgy , 编辑部邮箱 ,2017年06期
【分类号】TB333
【被引频次】4
【下载频次】160

打印本页

节点文献中：