【摘要】 引力波探测望远镜配有5个用于不同频段观测的镜筒。每个镜筒重720 kg,平行安装在中间块上。为了保证每个镜筒的位置精度和长期稳定性,借助ANSYS Workbench,对支承5个镜筒的中间块的结构形式进行了拓扑优化,得到最佳力传递路径。然后根据拓扑优化的结果,设计了三种中间块结构并优化了各自的结构尺寸,得到最佳的设计方案。最佳方案表明:在整体重力作用下,镜筒方向在0°,45°,90°的位置最大倾斜量分别为5.43″,3.84″,0″,结构自振频率为75.68 Hz。计算结果表明所设计的多镜筒中间块满足探测望远镜的指标要求。更多还原

【Abstract】 The gravitational wave telescope designed in this paper is equipped with five tubes to observe the cosmic microwave background radiation at different wave lengths. These five tubes,each 720 kg in weight,are installed on the center section of the telescope in parallel. To guarantee the position accuracy and long-term stability of each tube,the structure of the center section,under the gravity of five tubes,is optimized by using the topology optimization via the finite element analysis software ANSYS Workbench,from which the optimal path of force transmission is also obtained. According to the results of the topology optimization,three kinds of center section structures are designed and optimized on the dimensions. The optimal solution indicates that the max tilt angle of tubes at the position of 0 °,45 °,and 90 ° is 5. 055 5″,3. 574 6″,and 0″,respectively,and the natural frequency of the structure is 75. 68 Hz.Calculation results show that the designed center section meets the requirement of the telescope.更多还原