【摘要】 采用两种热敏MEMS传感器阵列和一种电容式MEMS传感器,在FL-21风洞中开展了平板模型表面摩擦应力分布测量试验研究。试验马赫数(Ma)为0.3～0.6,试验雷诺数(Re)为(0.63～1.23)×107m-1,模型迎角为0°。试验结果表明:平板模型边界层流动能量主要集中在1000Hz以内;试验测得的表面摩擦应力分布随Ma变化规律与可压缩层流/湍流估算值吻合较好;试验所用平板模型边界层流动转捩起始点位于距平板前缘160mm附近,终止点在距平板前缘202.5～242.5mm之间。更多还原

【Abstract】 Skin friction distribution test of a flat plate model was conducted using MEMS floating element sensor and two thermal sensitive MEMS-based sensor arrays in FL-21 high speed wind tunnel,and the cross section of its test section is 0.6m×0.6m.The test range of Mach number was from 0.3 to 0.6,the Reynolds number was from 0.63×107 to 1.23×107per meter,and the angle of attack was 0°.Results indicate that the flow’s energy near the plate wall is mainly concentrated in the frequency domain less than 1000Hz;the skin friction distribution measured by the MEMS sensors agrees well with the theoretical results during the whole Mach number of the test;the boundary layer transition of the flat plate starts at the point near 160mm,and ends between 202.5mm and 242.5mm away from the leading edge of the plate.更多还原