【摘要】 为了研究烧结颈在螺旋孔隙多孔钛中所起的作用,利用数值模拟的方法对烧结颈尺寸和烧结颈位置对多孔钛单胞压缩力学性能的影响进行研究。结果表明:多孔钛单胞的压缩力学性能由单胞的螺旋孔隙结构和烧结颈决定,烧结颈的贡献系数约是螺旋孔结构贡献系数的3.5倍;随着相对烧结颈尺寸的增加,多孔钛单胞的压缩屈服强度和弹性模量增加;单胞中C1烧结点是最重要的烧结位置;在相同条件下,增加C1处的烧结颈尺寸对压缩性能的提高更有效。更多还原

【Abstract】 In order to study the role of sintering neck in porous titanium with helical pores, the effect of size and position of sintering neck on compressive mechanical properties of porous titanium single cell was studied by using numerical simulation method. The results show that the compressive mechanical properties of the porous titanium unit cell are determined by the helical pore structure and sintering neck. Contribution coefficient of sintering neck is approximately 3.5 times larger than that of helical pore structure. With the increase of the relative diameter of sintering neck, compressive yield stress and elastic modulus of the cell are constantly increased. The sintering point of C1 is the most important sintering position. Under the same condition, increasing the size of sintering neck at C1 is much effective to the increasing of compressive properties.更多还原