节点文献
氯化锌活化丝瓜络制备微孔活性炭
Microporous activated carbon prepared from luffa cylindrical sponge by chemical activation with zinc chloride
【摘要】 以丝瓜络为原料,经氯化锌活化丝瓜络制备微孔活性炭。通过设计正交实验,考察了不同因素氯化锌浓度、活化温度、活化时间和浸泡时间对所制备活性炭吸附性能的影响。结果表明:最佳工艺条件为活化剂浓度40%、活化温度450℃、活化时间60 min和浸泡时间12 h。在此条件下制备的活性炭孔径分布窄,为多微孔、无定形活性炭,BET比表面积达1 020 m2/g,其吸附碘值、亚甲基蓝值分别达到819.45 mg/g、165.43 mg/g,是一种廉价且吸附性能高的吸附材料。
【Abstract】 Microporous activated carbon was prepared from luffa cylindrical sponge by ZnCl2 activation.The effects of concentration of zinc chloride solution,activation temperature,activation time and impregnating time on the properties of as-prepared activated carbons were investigated by means of orthogonal test design.Results showed that the optimal conditions were following: concentration of zinc chloride solution of 40%,activation temperature of 450 ℃,activation time of 60 min,and impregnating time of 12 h.The as-prepared activated carbon exhibits porous and amorphous structure,which has a high surface area of 1 020 m2/g,and the iodine and methylene blue adsorption value reached to 819.45 mg/g and 65.43 mg/g,respectively.This study presents that luffa cylindrical sponge is a low cost raw material with high adsorption properties.
- 【文献出处】 炭素技术 ,Carbon Techniques , 编辑部邮箱 ,2012年03期
- 【分类号】TQ424.11
- 【被引频次】19
- 【下载频次】613