节点文献

固溶处理温度对00Cr27Ni7Mo5N不锈钢组织及腐蚀性能的影响

Influence of solution temperature on microstructure and corrosion behavior of 00Cr27Ni7Mo5N stainless steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄盛宋志刚郑文杰尹建成

【Author】 HUANG Sheng1,2,3,SONG Zhi-gang1,ZHENG Wen-jie1,YIN Jian-cheng2(1.Institute of Structural Material,Central Iron and Steel Research Institute,Beijing 100081,China; 2.Materials Science and Engineering,Kunming University of Science and Technology,Kunming Yunnan 650093,China; 3.Research of Applied Materials,Shanghai Kaiquan Pump(Group) Co.,Ltd.,Shanghai 201804,China)

【机构】 钢铁研究总院结构材料研究所昆明理工大学材料科学与工程学院上海凯泉泵业(集团)有限公司材料应用研究室

【摘要】 研究了不同固溶处理温度对特超级双相不锈钢00Cr27Ni7Mo5N组织及腐蚀性能的影响。采用光镜、扫描电镜、能谱仪等手段研究σ相的析出规律,同时采用三氯化铁浸泡试验、点蚀电位测量及EPR法晶间腐蚀测量研究腐蚀性能。结果表明,当固溶温度在800~1050℃之间,00Cr27Ni7Mo5N钢有大量金属间化合物σ相析出,导致钢的抗腐蚀性显著下降。当固溶温度在1070~1200℃时,钢中σ相溶解,钢的抗腐蚀性先升高后降低。1100℃固溶处理时,00Cr27Ni7Mo5N钢具有最佳的耐腐蚀性。

【Abstract】 The effect of solution temperature on the microstructure and corrosion resistance of hyper duplex stainless steel 00Cr27Ni7Mo5N was studied σ phase precipitation and its effect on microstructure was analyzed by OM,SEM,EDS.Using ferric chloride immersion test,pitting potential measurement and intergranular corrosion EPR method to measure the corrosion resistance.It can be conclude,the intermetallic compound σ phase precipitateed in the range of 800-1050 ℃,leads to a sharp decrease in the corrosion resistance;contrary results were obtained with increasing the solution temperature from 1070 ℃ to 1200 ℃,the optimum solution temperature of the steel was 1100 ℃.

  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2011年12期
  • 【分类号】TG156.94
  • 【被引频次】11
  • 【下载频次】231
节点文献中: