节点文献

动载荷条件下紫铜/铬青铜受流摩擦磨损性能

TRIBOLOGICAL CHARACTERISTICS OF T2/QCr0.5 RUBBING PAIRS WITH ELECTRIC CURRENT AND DYNAMIC LOAD

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 胡道春孙乐民上官宝

【Author】 HU Daochun SUN Lemin SHANGGUAN Bao (Institute of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003)

【机构】 河南科技大学材料科学与工程学院

【摘要】 以紫铜/铬青铜摩擦副为研究对象模拟受电弓与导线的服役条件,在HST100型销盘式高速载流试验机上考察了该材料在动载荷(按正弦规律加载)条件下受流摩擦磨损性能。结果表明:在动载荷条件下,电流是影响其摩擦磨损性能的重要因素。摩擦系数、磨损率均随电流的增大递增,但随着电流的进一步增加其增大趋势减缓;粘着磨损、电弧侵蚀、塑性变形是其主要的磨损形式。

【Abstract】 The tribological characteristics of T2/QCr0.5 rubbing pairs under the load of sine shock pulse and in the electrical current of various intensities,which simulated working conditions of the pantograph-wire system used in electrical railway,were examined on the pin-on-disc friction and wear tester of HST100.The results show that the electrical current is the important effect factor on tribological properties with electrical current. friction coefficient and wear rate increase with current intensity whereas the tendency is slow up with the further increasing of electrical current.The most wear form is adhesive wear,arc erosion and plastic deformation.

【基金】 国家重点基础研究发展规划项目(2007CB607603);国家自然科学基金项目(50775066);河南省高校科技创新人才项目(2009HASTIT008);河南省创新团队项目
  • 【文献出处】 中国腐蚀与防护学报 ,Journal of Chinese Society for Corrosion and Protection , 编辑部邮箱 ,2009年01期
  • 【分类号】TG115.58
  • 【被引频次】21
  • 【下载频次】179
节点文献中: