节点文献

采用定量金相法分析亚共析钢拉拔变形中先共析铁素体应变量

Strain of the Proeutectoid Ferrite in Hypoeutectoid Steel During Drawing Tested by Quantitative Metallography

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 涂益友曹文奎方峰翟晓东蒋建清

【Author】 TU Yi-you,CAO Wen-kui,FANG Feng,ZHAI Xiao-dong,JIANG Jian-qing (1.Department of Materials Science and Engineering,Southeast University,Nanjing Jiangsu 210096,China; 2.Technological Center of Fasten Group,Jiangyin Jiangsu 214433,China)

【机构】 东南大学材料系江苏法尔胜技术开发中心东南大学材料系 江苏南京210096江苏南京210096江苏江阴214433江苏南京210096

【摘要】 采用定量金相法分析计算了亚共析钢拉拔变形中先共析铁素体应变量。结果表明 ,拉拔变形初期先共析铁素体应变量增大趋势远高于珠光体应变量 ;当应变量达到一定程度ε≈ 1 0时 ,两者同步增长 ,但最终先共析铁素体应变量仍远大于珠光体应变量

【Abstract】 The strain of the proeutectoid ferrite in hypoeutectoid steel drawing was measured and analyzed by quantitative metallography.The results show that strain of the proeutectoid ferrite increases faster than that of pearlite at the beginning of deformation.When the drawing strain reaches to about 1.0,the increasing of the strain of both the proeutectoid ferrite and pearlite is synchronous.But eventually the strain of the proeutectoid ferrite is still larger than that of pearlite.

【关键词】 钢丝定量金相法应变量
【Key words】 steel wirequantitative metallographystrain
【基金】 国家 8 6 3项目 ( 2 0 0 3AA3 3 1 0 3 0 ) ;江苏省自然科学基金项目 (BK2 0 0 1 2 1 5 )
  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2005年01期
  • 【分类号】TG115.21
  • 【被引频次】4
  • 【下载频次】317
节点文献中: