节点文献

选择性合成1-氯-3-甲基-2-丁烯工艺条件研究

Reaction Conditions for Selective Synthesis of 1-Chloro-3-methyl-2-butylene

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈坤; 成忠兴; 胡传群; 黄光斗;

【Author】 CHEN Kun 1, CHENG Zhong-Xing 2, HU Chuan-Qun 2, HUANG Guang-Dou 2 ( 1Graduate Studies Department, Hubei Polytechnic University, Wuhan 430068, China; 2Department of Chemical Engineering, Hubei Polytechnic University, Wuhan 430068, China)

【机构】 湖北工学院研究生部; 湖北工学院化学工程系; 湖北工学院化学工程系 武汉430068; 武汉430068; 武汉430068;

【摘要】 比较不同链长的季胺盐对异戊二烯与盐酸加成反应的异构化影响 ,筛选出新的异构化催化剂N ,N 二 (3 甲基 2 丁烯基 ) N 甲基苄基氯化铵。研究了盐酸与异戊二烯物质的量比、反应深度对产物分布的影响 ,获得最佳工艺条件 :在新催化剂存在下 ,n (酸 )∶n (异戊二烯 ) =1∶1 2~ 1 4 4 ,异戊二烯过量 4 2 % ,1 氯 3 甲基 2 丁烯的选择性达到 83 6 % ,收率 78 7% ,为选择性合成 1 氯 3 甲基 2 丁烯开辟了一条新途径。

【Abstract】 This research tested the effect of different carbon lengths of quaternary salts on isomerization products of isoprene in the presence of HCl, and screened for two novel catalysts,N,N-di-(3-methyl-2-butenyl)-N-methyl benzylammonium chloride. The molar ratio of IP to HCl and extent of reaction on the product distribution was also investigated. Optimum reaction conditions were as follows: in the presence of the novel catalysts, with molar ratios of IP to HCl at about 1∶1.2 to 1.44, and 4.2% excess IP, the main product, 1-chloro-3-methyl-2-butylene (1,3,2-CMB),was selectively produced at 83.6%, and total 1,3,2-CMB production was 78.7%. These results provided a new approach to selective preparation of 1,3,2-CMB.

【关键词】 异戊二烯; 丁烯; 合成;
【Key words】 isoprene synthesis; butylene; synthesis;
  • 【文献出处】 农药 ,Pesticides , 编辑部邮箱 ,2004年05期
  • 【分类号】O623.2
  • 【被引频次】4
  • 【下载频次】189
节点文献中: