【摘要】 针对 10 5 0mm× 15 0mm断面的结晶器 ,建立了水模型 ,研究浸入式水口结构、拉速、浸入深度等工艺操作参数对结晶器液面波动、流股冲击深度及结晶器钢液面保护渣卷入情况的影响 ,比较不同水口结构参数及操做参数对结晶器内流场的影响 ,从而找出结构参数与工艺参数间配合最佳的工况 ,为水口设计提供理论依据 ,并经优化的水口在实际中应用 ,使安钢第二炼钢厂的板坯退废率由 1.5 0 %降为0 .6 %。更多还原

【Abstract】 A water model for simulation of 1050 mm mold is established to investigate the effects of SEN structure, casting speed, immersion depth and other parameters on the fluctuation of the liquid level in the mold, the impact depth of the steel stream and entrapping of the flux, and compare the influence of different structure parameters and operating parameters on the flowing field in the mold in order to find out the best suitable compromise between the structure parameters and the operating parameters and then use them as the theoretical basis for SEN design. Actual results in Anyang Steel Works show that the rejected product rate has cut down to 0.6 % from 1.5 % since installation of the optimized SEN in the continuous slab caster in the Steel Works.更多还原