节点文献
新型分步合成法制备的P567固态染料可调谐激光器
Tunable solid-state dye laser with P567 doped sample made by novel stepwise synthesis technique
【摘要】 采用分步合成方法制备激光染料P5 6 7掺杂有机改性凝胶玻璃。利用调QNd∶YAG激光器倍频光(5 32nm)纵向泵浦固态染料 ,通过光栅调谐 ,得到了调谐范围超过 30nm(5 5 3nm~ 5 85nm )、最高斜效率 9.7%的线偏振激光输出。输出波长为 5 74nm时 ,脉宽为 4ns,线宽 0 .0 1 4nm。实验中还获得了 7nm(FWHM)的宽带激光输出 ,斜效率为 6 9%。在 2Hz,0 .1J/cm2 的 5 32nm激光泵浦下 ,380 0 0个脉冲后 ,输出能量降到初始输出的 5 0 %。
【Abstract】 The solid dye samples used in our experiment is made by a stepwise synthesis technique through a sol gel process.Laser dye doped in the sample is pyrromethene 567.Longitudinally pumped tunable solid state dye lasers with intra cavity grating are established with Q switched frequency doubled Nd∶YAG laser pumping source.The slope efficiency of 9.7% and tunable range over 30nm(from 553nm~585nm) has been achieved.The pulse width is 4ns and the spectrum width is 0.014nm at 574nm wavelength.The laser output broad band of 7nm(FWHM) and 69% slope efficiency are also obtained in the experiment.With 0.1J/cm 2 pump fluency and 2Hz repetition rate,the output energy decreases to 50% of initial value after 38000 shots.
【Key words】 solid state dye laser; P567; tunable; stepwise synthesis; sol gel;
- 【文献出处】 激光技术 ,Laser Technology , 编辑部邮箱 ,2004年01期
- 【分类号】TN248.1
- 【被引频次】2
- 【下载频次】67