节点文献

纳米SiO2/Cu复合镀层的制备和组织性能研究

Preparation and Properties of Nanometer SiO2/Cu Composite Coatings

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王文芳吴玉程郑玉春王学伦陈加取

【Author】 WANG Wen-fang, WU Yu-cheng, ZHENG Yu-chun, WANG Xue-lun, CHENG Jia-qu(College of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China).

【机构】 合肥工业大学材料学院合肥工业大学材料学院 安徽合肥230009安徽合肥230009安徽合肥230009

【摘要】 采用铜和纳米SiO2 粉末的复合电沉积方法 ,在 4 5钢板表面获得了厚度 0 .1~ 0 .2mm的Cu/SiO2 复合镀层 ,并应用扫描电镜、光学显微镜、显微硬度计、磨损试验机等对复合镀层的微观组织结构和性能进行了分析研究。结果表明 :在实验进行的工艺范围内 ,可获得表面平整、光滑、SiO2 微粒均匀分布且与基体具有良好结合的复合电沉积层 ;复合镀层具有良好的硬度和耐磨性能 ;随镀覆时间的增加 ,复合镀层中的微粒粒度增加 ,并先沉积的粒子为核心而长大。

【Abstract】 SiO2 /Cu composite coating with thickness of 0.1~0.2 mm was deposited on steel plate by electrodepositing method. The microstructure and performance of composite coating were studied by SEM, optics microscope, microhardometer and wear tester. The results show that the surface of SiO2 /Cu composite coating is flat and smooth. The SiO2 particles in composite coating is uniform and has high bonding strength with matrix. The composite coating has high hardness and antiwear under testing circumstance. The granularity of SiO2 particles increases with the depositing time.

【基金】 安徽省自然科学基金资助 ( 0 0 0 464 0 3 )
  • 【文献出处】 材料保护 ,Materials Protection , 编辑部邮箱 ,2004年02期
  • 【分类号】TQ153
  • 【被引频次】10
  • 【下载频次】171
节点文献中: