节点文献

络合沉淀法合成纳米氧化铜粉体及其性能表征

Preparation of Nanophase CuO Composite Powder and Its Electrochemical Behavior

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李冬梅夏熙

【Author】 LI Dong-Mei, XIA Xi (Institute of Applied Chemistry, Xinjiang University, Urumqi 830046, China)

【机构】 新疆大学应用化学研究所新疆大学应用化学研究所 乌鲁木齐830046乌鲁木齐830046

【摘要】 以Cu(NO3)2为原料,采用络合沉淀法合成了纳米级CuO粉体,并对产品结构性能进行了表征.探讨了氨水,柠檬酸,乙二胺三种不同络合剂对粉体粒径的影响,三种络合剂得到粉体平均粒径在40~60nm之间,粉体的粒径随着络和物稳定性的增加而增大.获得了以氨水为络合剂制备纳米氧化铜粉体的最佳工艺条件,以氨水为络合剂所得CuO粉体平均粒径40nm,分散性好、收率高.

【Abstract】 Nanophase CuO powders were made from Cu(NO3)2 by the complexing-precipitate method, and the effects of complexing agent on particle sizes studied. The results show that CuO powders are smaller in size and slightly aggregate. The sample particles thus obtained are spherical and their average particle sizes are between 40~60nm. With NH3.H2O as the complexing agent, the best reaction conditions for preparing nanophase CuO are that the reaction temperature is 30℃ and the molar ratio of Cu(NO3)2 to NaOH is 1:3.

【基金】 国家自然科学基金(29963002)
  • 【文献出处】 无机材料学报 ,Journal of Inorganic Materials , 编辑部邮箱 ,2001年06期
  • 【分类号】TB44
  • 【被引频次】100
  • 【下载频次】1343
节点文献中: