【摘要】 我国冷杉蓄积量丰富 ,广泛分布于西南、西北广大林区 ,开发利用冷杉鞣料具有重要意义。本文采用几种不同的浸提方法制取冷杉栲胶 :1)水浸提 ;2 )添加亚硫酸盐 ,包括在浸提过程中和浸提后的溶液中加入两种方法 ;3)合成单宁改性。用不同方法制取的栲胶做了鞣革研究 ,比较其成革性能。试验结果表明 ,冷杉栲胶经亚硫酸盐和合成单宁处理后 ,沉淀减少 ,渗透速度加快 ,成革丰满坚实 ,颜色浅淡 ,鞣革性能得到较大的改善。加亚硫酸盐浸提的栲胶结合鞣质和鞣制系数虽有所下降 ,但渗透速度却快得多 ,而且栲胶的浸提率大 ,因而列为首选的方法。浓胶加合成单宁的方法因渗透快和结合力较强 ,也可供选择。更多还原

【Abstract】 Abies fabri bark, collected from Heshui Forest Area of Yunnan, was extracted by water solution or sulfiting and the tanning extract with water was modified by sulfiting or syntan. Then the four extracts were used to tan skin under the same conditions to compare their tanning properties. The results of experiments show that the extract extracted by sulfiting in the process may decrease its combination tannin and tanning number, but it has a lower deposits in tanning solution, fast penetration to skin and mild astrigence with skin. Furthermore, the resultant leather is fullness, stiffness and appearance of lightness. The extract modified by syntan has almost the same tanning properties as the one extracted by sulfiting in the process. In a word, the way to extracted by sulfiting in the process is the best way to prepare tannin extract. Also, the extract modified by syntan should be another choice for its fast penetration and stronger combination.更多还原