节点文献

非晶化程度对不同成分Mg-Ni非晶合金电极充放电容量的影响

Effect of the Amorphization Degree on Charging-Discharging Capacities of the Amorphous Mg-Ni Alloy Electrodes with Different Compositions

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 季世军孙俊才许彬严立

【Author】 JI Shijun,SUN Juncai,XU Bin,Yan Li (Institute of Materials and Technology,Dalian Maritime University,Dalian,116026,China)

【机构】 大连海事大学材料工艺研究所!辽宁大连116026

【摘要】 研究了球磨过程中的非晶化程度对不同成分Mg -Ni非晶合金电化学吸放氢性能的影响。研究结果表明 ,随着合金成分的不同 ,非晶化程度的影响不同。当Ni含量低于 50 % (原子分数 )时 ,合金粉末中的非晶相所占比例越高 ,即非晶化程度越高时 ,合金电极的放电容量越大 ;而当Ni含量高于 50 % (原子分数 )时 ,非晶合金中存在少量游离态的Ni相 ,可提高电极的放电量。分析认为这与Ni相的存在改善了合金的吸放氢动力学性能有关。

【Abstract】 This paper deals with the effects of amorphization degree during ball-milling on the charging-discharging capacity of the amorphous Mg-Ni alloys with different compositions.The results showed that with the different Ni concentration,the effect of degree of amorphization was different.When the Ni<50at.%,the more the amorphous phase in the powder,the more the capacity.When the Ni>50at.%,the Ni phase in the amorphous alloys was helpful to charging-discharging.It is suggested that the Ni improved the dynamics properties of charging-discharging of the amorphous alloys.

【基金】 国家自然科学基金!资助项目 ( 5960 1 0 0 5)
  • 【文献出处】 功能材料 ,JOURNAL OF FUNCTIONAL MATERIALS , 编辑部邮箱 ,2000年S1期
  • 【分类号】TG139.8
  • 【被引频次】8
  • 【下载频次】98
节点文献中: