节点文献

壳核结构增韧剂对热塑性共聚酯/聚乙烯辛烯弹性体共混体系增容与增韧的影响

THE EFFECT OF A CORE-SHELL TOUGHNER ON COMPATIBILIZATION OF THERMAL PLASTIC COPOLYESTER/POLYETHYLENE\|OCTENE ELASTOMER BLENDS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 雷鸣邹军锋于中振欧玉春杨桂生

【Author】 LEI Ming, ZOU Junfeng, YU Zhongzhen, OU Yuchun, YANG Guisheng (State Key Laboratory of Engineering Plastics,Institute of Chemistry,Chinese Academy of Sciences,Beijing\ 100080)

【机构】 中国科学院化学研究所工程塑料国家重点实验室!北京100080中国科学院化学研究所工程塑料国家重点实?

【摘要】 研究了马来酸酐接枝的聚乙烯辛烯弹性体 /半结晶性塑料共混物 (TPEg)对热塑性共聚聚酯(PETG) /聚乙烯辛烯弹性体 (TPE)共混体系增容增韧作用的影响 .马来酸酐接枝物显著地改善了PETG与TPE之间的相容性 ,导致TPE分散相颗粒细化 ,并促使分散相颗粒面间距等于甚至小于实现脆韧转变所需的临界面间距 .在固定PETG基体含量为 85wt %的前提下 ,当TPEg在 15 %分散相中的含量由 2 0 %增加到30 %时 ,即TPEg在共混体系中的含量由 3 %增加到 4 5 %时 ,共混体系出现了由脆性到韧性的转变 ,冲击强度急剧升高

【Abstract】 A maleic anhydride grafted polyethylene\|octene rubber/semi\|crystalline polymer blend(TPEg)was adopted as a compatibilizer to compatibilize amorphous copolyester (PETG)/polyethylene\|octene rubber (TPE) blends.The presence of maleic anhydride group on the TPEg increases the compatibility between PETG and TPE and decreases the dispersed phase size.At a fixed PETG content of 85wt%,a sharp brittle\|tough transition occurs when the TPEg content in the dispersed phase increases from 20 to 30 wt%,namely that the TPEg content in the blend increases from 3 to 4 5 wt%.

【关键词】 增韧界面相容性热塑性共聚酯
【Key words】 TougheningInterfaceCompatibilizerCopolyester
  • 【文献出处】 高分子学报 ,ACTA POLYMERICA SINICA , 编辑部邮箱 ,2000年05期
  • 【分类号】O633
  • 【被引频次】11
  • 【下载频次】183
节点文献中: