节点文献

高速公路倒装结构沥青面层厚度研究

Research on Thickness of Asphalt surface-course in Expressway inversive Structure

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 钟梦武吴善周谢立新张端良黄开宇

【Author】 ZHONG Mengwu1,WU Shanzhou1,XIE Lixin2,ZHANG Duanliang2,HUANG Kaiyu1(1.Hunan Communications Science Reasearch Institute,Changsha,Hunan 410015,China;2.Hunan Expressway Administration bureau,Changsha,Hunan 410001,China)

【机构】 湖南省交通科学研究院湖南省高速公路管理局湖南省交通科学研究院 湖南长沙410015湖南长沙410015湖南长沙410001

【摘要】 按照我国现行沥青路面设计规范,在倒装结构中采用较薄的沥青面层厚度,沥青层的拉应力反而较小,层底拉应力验算很容易通过,容易误导公路技术人员设计一些较薄沥青面层的不合理倒装结构。详细分析了沥青面层厚度对倒装结构各结构层应力的影响情况,在此基础上,分析了我国高速公路倒装结构沥青面层的合理厚度应在12~18 cm。

【Abstract】 according to present specifications for design of expressway asphalt pavement of our country,the tensile stress of asphalt pavement is instead smaller if we use the thinner asphalt pavement thickness in inversive structure.And more it is easy to mislead the road technical personnel to design some unreasonable inversive structure of the thinner asphalt pavement because the inspecting of level bottom tensile stress is very easy to pass.This article analysis the influence situation of thickness of asphalt pavement on various structures level stress in inversive structure.In this foundation,it is analyzed that the reasonable thickness of asphalt pavement in inversive structure is supposed in 12~18 centimeter in expressway.

【关键词】 高速公路沥青路面倒装结构
【Key words】 expresswayasphalt pavementinversive structure
【基金】 湖南省交通科技项目(200315)
  • 【文献出处】 公路工程 ,Highway Engineering , 编辑部邮箱 ,2007年04期
  • 【分类号】U416.217
  • 【被引频次】29
  • 【下载频次】260
节点文献中: 

本文链接的文献网络图示:

本文的引文网络