节点文献

磨削粗糙度在线检测方法的实验研究

Experimental study on on-line detecting method of grinding roughness

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘贵杰赵雷梅宁

【Author】 Liu Guijie,Zhao Lei,Mei Ning (Engineering College,Ocean University of China,Qingdao 266100,China; Qingdao Technological Universily,Qingdao 266033,China)

【机构】 中国海洋大学工程学院青岛理工大学中国海洋大学工程学院 青岛 266100青岛 266033青岛 266100

【摘要】 本文对基于摩擦声发射信号的磨削粗糙度在线检测方法进行了实验研究。实验结果表明,采用声发射传感器探头与磨削表面摩擦产生的声发射信号的特征可以对磨削表面粗糙度进行评价,建立了摩擦声发射信号特征与磨削表面粗糙度之间的对应关系,并通过实验对该方法的可行性进行了实测。结果表明,探针与工件表面摩擦声发射信号的FFT和RMS特征与磨削粗糙度有很好的对应关系,可用于磨削表面粗糙度的在线检测。

【Abstract】 On-line nleasurcment method of grinding surface roughness hased on friction-induced acoustic emission was studied experimentally. The relationship between the FFT(fast Fourier transform) and RMS (root mean square) features of the friction-induced aciystic emission signal and the grinding roughness was found. The experimental results show that the grinding surface. roughness can be estimated by the friction-induced acoustic emission signal generated between acoustic emission sensor pin and the grinding surface. The study results indicate that the FFT and RMS features of the acoustic emission signal generated by friction can be used to detect to the grinding roughness online.

【关键词】 磨削粗糙度在线检测信号
【Key words】 grinding roughnesson-line detectingsignals
【基金】 山东省自然基金(Y2005F16);山东省博士基金(2004BS05012)资助项目
  • 【文献出处】 仪器仪表学报 ,Chinese Journal of Scientific Instrument , 编辑部邮箱 ,2007年01期
  • 【分类号】TP274.4
  • 【被引频次】12
  • 【下载频次】336
节点文献中: 

本文链接的文献网络图示:

本文的引文网络