节点文献

前处理软件与ProCAST的接口连接方式

Interface Mode of Preprocess Software and Procast Software

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 苏大为赵玉涛王雷刚郑成琪

【Author】 Su Dawei, Zhao Yutao, Wang Leigang, Zheng Chengqi (School of Material Science and Engineering, Jiangsu University, Zhenjiang, China)

【机构】 江苏大学材料科学与工程学院江苏大学材料科学与工程学院

【摘要】 针对ProCAST软件建模和网格划分能力不强的问题,讨论了前处理软件与ProCAST的3种接口方式。以模拟低压铸造铝合金轮毂的网格划分为例,编写数据转换程序,实现了Pro/E、ANSYS等前处理软件与ProCAST软件的联接,解决了复杂?精细铸件无法在MeshCAST中划分有限元网格的问题。分析比较网格划分的质量,结果表明,采用Pro/E建模划分网格,经数据转换程序导入ProCAST再进行模拟分析是最为有效、快捷的工作方式,可以显著提高铸造模拟计算的精度和速度。

【Abstract】 Aiming at modeling and meshing deficiency of Procast software, three interface modes of preprocess software and Procast software have been approached. Data exchange program is written to process the interface of Pro/E, ANSYS software and Procast software by meshing aluminum alloy wheel simulation grid in low pressure casting, effectively solving the meshment of finite element grid of complicate parts in Meshcast software. By comparing the modes of modeling and meshing, it is a most efficient way to conduct simulation by using Pro/E modeling and meshing grid, and then transmitting exchanging data into Procast software based on data exchanging program, improving the speed and accuracy of simulation calculation.

【基金】 江苏省科技成果转化项目(BA2005054);教育部重点基金资助项目(00170);江苏省高技术研究资助项目(BG2005026)
  • 【文献出处】 特种铸造及有色合金 ,Special Casting & Nonferrous Alloys , 编辑部邮箱 ,2007年05期
  • 【分类号】TP391.7
  • 【被引频次】43
  • 【下载频次】760
节点文献中: 

本文链接的文献网络图示:

本文的引文网络