节点文献
液-液原位反应合成TiB2/CuCrZr复合材料的研究
Preparation of TiB2/CuCrZr Composites by Liquid-liquid In-situ Synthesis
【摘要】 利用液-液原位反应法地制备了TiB2/CuCrZr复合材料,并且研究了TiB2含量对复合材料硬度和电导率的影响。结果表明,TiB2颗粒分布不均匀,呈现团粒状和细长棒状两种形态,在铸态下,复合材料的硬度比常规的铸态CuCrZr合金有较大的提高,复合材料的硬度随着TiB2含量的增加呈先增后减的趋势,TiB2含量为3%时的硬度最佳(HV为206);电导率随TiB2含量的增加有所下降。
【Abstract】 TiB2/CuCrZr composites have been successfully prepared by liquid-liquid in-situ synthesis , and the effects of TiB2 content on hardness and electric conductivity of the composites have been examined. The results reveal that the hardness of composites exhibits the trend of initial increase and then decrease with the increase of TiB2 content, observing the maximum hardness ,HV 206, with 3% TiB2 content. Electric conductivity of the composites is slightly dropped with the increase of TiB2 content.
【关键词】 液-液反应;
铜基复合材料;
原位合成;
TiB2;
【Key words】 Liquid-liquid Reaction; Cu Matrix Composites; In-situ Synthesis; TiB2;
【Key words】 Liquid-liquid Reaction; Cu Matrix Composites; In-situ Synthesis; TiB2;
【基金】 中国船舶重工集团科研资助项目(T060511087)
- 【文献出处】 特种铸造及有色合金 ,Special Casting & Nonferrous Alloys , 编辑部邮箱 ,2007年04期
- 【分类号】TB331
- 【被引频次】6
- 【下载频次】151