节点文献

铝对挤压态高铝镁合金组织与力学性能的影响

Influences of Al on Microstructure and Mechanical Properties of As-extruded Magnesium Alloy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王庆民王智民

【Author】 WANG Qing-min,WANG Zhi-min (School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048,China)

【机构】 西安理工大学材料科学与工程学院西安理工大学材料科学与工程学院 陕西西安710048陕西西安710048

【摘要】 研究了Al含量在11%以上的高铝镁合金挤压变形后的组织与力学性能。结果表明,挤压变形可显著细化镁合金的晶粒,并且大大提高镁合金的力学性能。当Al含量为11%时,伸长率达到13.7%;当Al含量为20%时,抗拉强度为371.8MPa;当Al含量为25%时,抗拉强度和伸长率分别达到了最低,为247.0MPa和0.8%。

【Abstract】 The microstructure and properties of as-extruded high-alumina magnesium alloy with the proportion of Al element above 11% were investigated. The research indicates that extruding can refine the grain of magnesium alloy remarkably, and consequently enhance the mechanical properties rapidly,when the proportion of element Al is 11%,the elongation of magnesium alloy is 13.7%,when the proportion of element Al is 20%,tensile strength is 371.8 MPa,when the proportion of element Al is 25%,both the strength and the elongation of magnesium alloy are lowest, 247.0MPa and 0.8%,respectively.

【关键词】 变形镁合金抗拉强度伸长率
【Key words】 wrought magnesium alloytensile strengthelongation
【基金】 陕西省自然科学基金资助项目(2005E102)
  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2007年04期
  • 【分类号】TG113
  • 【被引频次】3
  • 【下载频次】243
节点文献中: 

本文链接的文献网络图示:

本文的引文网络