节点文献

高介电常数CaCu3Ti4O12陶瓷粉体的合成与烧结

Synthesis and Preparation of High Dielectric Constant CaCu3Ti4O12 Ceramic Powder

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘蓓蓓王传彬沈强张联盟

【Author】 LIU Bei-bei,WANG Chuan-bin,SHEN Qiang,ZHANG Lian-meng (State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology,Wuhan 430070,China)

【机构】 武汉理工大学材料复合新技术国家重点实验室武汉理工大学材料复合新技术国家重点实验室 武汉430070武汉430070

【摘要】 采用固相合成及常压烧结的方法制备了CaCu3Ti4O12(CCTO)高介电常数陶瓷材料,采用XRD、SEM、LCR等测试手段对合成与烧结过程以及介电性能进行了研究。结果表明,在温度高于1000℃时,CaCO3、CuO和TiO2可完全反应生成CCTO;温度高于1150℃时,CCTO分解。CCTO合成粉体的适宜烧结温度为1100℃,烧结试样结晶完整,结构致密,1kHz频率下相对介电常数达1.5×104,介电损耗0.27。

【Abstract】 CaCu3Ti4O12 ceramics with high dielectric constant were prepared by solid-state reaction followed by densification at high temperatures.The synthesis and sintering as well as the dielectric properties of the ceramics were investigated by means of XRD,SEM,and LCR.It was found that single phase CaCu3Ti4O12 was synthesized from CaCO3,CuO and TiO2 powders at temperatures higher than 1000℃,but it would decompose at 1150℃.The optimum temperature for sintering CaCu3Ti4O12 was 1100℃,where dense and well crystallized CaCu3Ti4O12 ceramics with a high dielectric constant above 1.5×104 and a loss tangent about 0.27 were successfully obtained.

【关键词】 CaCu3Ti4O12合成烧结介电性能
【Key words】 CaCu3Ti4O12synthesissinteringdielectric property
【基金】 教育部长江学者与创新团队发展计划资助
  • 【文献出处】 人工晶体学报 ,Journal of Synthetic Crystals , 编辑部邮箱 ,2007年03期
  • 【分类号】TF124.5
  • 【被引频次】10
  • 【下载频次】428
节点文献中: 

本文链接的文献网络图示:

本文的引文网络