节点文献

光催化氧化消除制革脱毛废水中的硫化物

Removal of Sulfide in Effluent from Tannery by Photocatalytic Oxidation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张宗才薛丽莎戴红肖尧

【Author】 ZHANG Zong-cai, XUE Li-sha, DAI Hong,XIAO Yao (Key Laboratory of Leather Chemistry and Engineering (Sichuan University), Ministry of Education, Chengdu 610065,China ;Department of Biomass and Leather Engineering, Sichuan University,Chengdu 610065,China)

【机构】 皮革化学与工程教育部重点实验室(四川大学)四川大学生物质与皮革工程系皮革化学与工程教育部重点实验室(四川大学) 四川 成都 610065四川 成都 610065

【摘要】 光催化氧化技术用于去除有机污染物,特别是难降解有机物是十分有效的。制革业中脱毛工序是产生污染最严重的,不仅含有有毒有害的硫化物,还产生大量的蛋白降解物。本文利用光催化氧化技术,对比分析了两种TiO2催化剂作用下的光催化氧化效果,采用分光光度法测定试样中硫化物的去除率,并用COD表征废水中总有机物的去除效果。结果表明,光催化氧化技术能使样品中硫化物尝试在8~10 h内降低90%以上;使脱毛废水和制革综合废水中的硫离子和COD在7 h左右分别去除约50%和70%。

【Abstract】 Photocatalytic oxidationhas is very effective for removing organic pollutant, especially hard-degradating organic pollutant. Unhairing is a process which pruduces the most pollutants in tanning processes including noxious sulfide and a large number of protein hydrolysates. Removing sulfide in effulent under TiO2 by photocatalytic oxidadtion, and measuring of the concentration of sulfide with spectrophotometer were studied. It was showed that the degrease of sulfide concentration in samples was over 90% in 8 to 10 hours, and the degreasing of both sulfide and COD in effluent from tannery was about 50% and 70% respectively, in 7 hours.

【关键词】 光催化氧化硫化物COD制革废水
【Key words】 photocatalytic oxidationsulfideCODtannery effluent
  • 【文献出处】 皮革科学与工程 ,Leather Science and Engineering , 编辑部邮箱 ,2007年01期
  • 【分类号】X794
  • 【被引频次】27
  • 【下载频次】270
节点文献中: 

本文链接的文献网络图示:

本文的引文网络