【摘要】 采用润滑轧制,在不同压下率、终轧温度及退火制度下,研究了IF钢铁素体区热轧时,不同工艺参数对IF钢深冲性能的影响。结果表明:在实验范围内,随压下率增加,r值提高;终轧温度下降,r值略微增加;高温退火可使变形铁素体充分再结晶,从而提高r值。ODF织构分析结果与检测结果是一致的。更多还原

【Abstract】 The effect of technology data for different reduction,different rolling temperature and annealing temperature on ferrite-region hot rolling of IF steel was researched under the condition of lubrication.The results show that the r-value increase with increasing the reduction,the r-value increases slightly with decreasing the finishing temperature,and the full recrystallization of deformed ferrite can be obtained by high temperature annealing,hence r-value is increased.ODF texture analysis result is consistent with the mealsured one.更多还原