【摘要】 针对压气机叶片在高负荷及非设计工况下经常出现的附面层分离状况,采用数值方法研究了叶片吸力面不同位置、不同吸气量时附面层抽吸对压气机转子气动性能的影响.数值结果表明:抽吸位置对抽吸效果有重要的影响,通过在分离区下游一定位置处抽吸,能够很好的抑制附面层分离,改善气流在大分离点处的剧烈变化,减少流动损失,使得级效率和压比均有显著的提高;而在分离区上游或者分离区下游的较远处开缝抽吸,则效果不理想.吸气量对抽吸效果也有一定影响,存在一个最佳吸气量,吸气量过大或者过小都会对结果产生不利影响.更多还原

【Abstract】 To provide a further prospective of the boundary layer separation of compressor rotor under high load and off-design working conditions,numerical method was used to study the effects of boundary layer suction of compressor rotor at different suction positions and suction flow rates on the aerodynamic performance of rotor.The results show that the suction position has great effect on the suction result.The boundary layer separation on the suction surface can be suppressed effectively through suction in proper downstream separation section.And,the dramatic change of gas flow at the separation point could be improved with lower flow loss,while the stage efficiency and pressure ratio can be improved remarkably.The effect is unsatisfactory in the event of slotted suction far away from the upstream or downstream of separation point.As suction flow rate also has a certain influence upon the suction effect,either bigger or lower suction flow rate has adverse effect on the result.更多还原