节点文献

高频窄脉冲电化学加工间隙的在线检测与控制

On-line gap monitor and control in HSPECM

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 狄士春吴海波赵万生迟关心

【Author】 DI Shi-chun,WU Hai-bo,ZHAO Wan-sheng,CHI Guan-xin(School of Mechanical and Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China)

【机构】 哈尔滨工业大学机电工程学院哈尔滨工业大学机电工程学院 哈尔滨150001哈尔滨150001

【摘要】 针对高频窄脉冲电化学加工,对加工间隙进行建模分析,提出了间隙平均电流检测法.通过测量相邻一组平均电流及其方差这2个参数判断间隙状态,从而对进给速度、进给量进行相应调整,实现对加工过程的控制.试验结果表明,间隙平均电流值及其方差能准确反映加工间隙的变化,从而快速调整工具进给速度,使之近似等于工件去除速度,精确地维持恒定的小间隙,实现快速稳定的加工.

【Abstract】 Due to high frequency short pulse electrochemical machining(HSPECM),machining gap model is built and the detection of interelectode gap average current is put forward.The state of interelectrode gap can be estimated through measuring a group of adjacent average current.Based on this method,the tool feed rate and feed amount can be adjusted according to the previous machining state.The experiment results demonstrate that interelectrode gap average current and its variance can reflect the machining gap exactly and tool feed rate can be quickly adjusted to approximate workpiece removal rate to maintain small and steady machining gap by the proposed control method.Thus,the fast and stable machining is realized.

【基金】 国家自然科学基金资助项目(50275038)
  • 【文献出处】 哈尔滨工业大学学报 ,Journal of Harbin Institute of Technology , 编辑部邮箱 ,2007年01期
  • 【分类号】TG662
  • 【被引频次】23
  • 【下载频次】320
节点文献中: 

本文链接的文献网络图示:

本文的引文网络