节点文献
离子源辅助电子枪蒸发制备Ge1-xCx薄膜
Preparation of Ge1-xCx Thin Film by e-gun Evaporation Assisted with Ion Source
【摘要】 应用电子枪蒸发纯Ge,考夫曼离子源辅助的方法在Ge基底上沉积了Ge1-xCx薄膜.制备过程中,Ge作为蒸发材料,CH4作为反应气体.通过改变CH4/(CH4+Ar)的气体流量比(G),制备了G从40%到85 %的Ge1-xCx薄膜.应用X射线衍射仪(XRD)测量了Ge1-xCx薄膜的晶体结构,使用傅里叶红外光谱仪(FTIR)测量了2~22μm的光学透过率,X射线光电子能谱测试(XPS)计算得到C的含量随G的变化关系,用纳米压痕硬度测试计测量了Ge1-xCx薄膜的硬度,原子力显微镜(AFM)测量了G为60%,85%时Ge1-xCx薄膜的表面粗糙度.测试结果表明:制备的Ge1-xCx薄膜在不同的G值下均为无定形结构.折射率随着G值的增加而减小,在3.14~3.89之间可变,并具有良好的均匀性以及极高的硬度.
【Abstract】 Ge1-xCx thin film was deposited on Ge substrate by e-gun evaporation and Kaufman ion source assisted technique.During the deposition process,Ge was evaporated by e-gun and CH4 was ionized by Kaufman ion source as a reactive gas.The CH4/(CH4+Ar) flow rate ratio (G) was carefully controlled to obtain different C concentration and it was measured through X-ray Photoelectron Spectroscopy (XPS). Crystal structure was investigated by X-ray Diffraction (XRD).The optical transmittance of Ge1-xCx thin film in the infrared region between 2~22 μm was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and the uniformity of Ge1-xCx thin film was analyzed using Atomic Force Microscopy (AFM).Hardness of Ge1-xCx thin film was measured via nano-indentation.Test results indicated the fabricated Ge1-xCx thin films had finely tunable refractive index between 3.14~3.89,good uniformity and high hardness.This shows that e-gun evaporated pure Ge and Kaufman ion source assisted technique is a promising technique to fabricate Ge1-xCx thin film.
【Key words】 Ge1-xCx thin film; E-gun evaporation; Ion Assisted Deposition(IAD); Kaufman ion source;
- 【文献出处】 光子学报 ,Acta Photonica Sinica , 编辑部邮箱 ,2007年04期
- 【分类号】O484.1
- 【被引频次】5
- 【下载频次】178