节点文献

高轴压比钢骨混凝土矮墙水平加载试验

LATERAL LOADING EXPERIMENT OF SRC LOW SHEAR WALLS WITH HIGH AXIAL FORCE RATIO

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 魏勇钱稼茹赵作周蔡益燕郁银泉申林

【Author】 Wei Yong Qian Jiaru Zhao Zuozhou(Key Laboratory for Structural Engineering and Vibration of the Ministry of Education,Civil Engineering Department,Tsinghua University Beijing 100084)Cai Yiyan Yu Yinquan Shen Lin(China Institute of Building Standard Design & Research,China Architecture Design & Research Group Beijing 100044)

【机构】 清华大学结构工程与振动教育部重点实验室土木工程系中国建筑设计研究院中国建筑标准设计研究院中国建筑设计研究院中国建筑标准设计研究院 北京100084北京100084北京100044

【摘要】 为研究高轴压比钢骨混凝土矮墙的抗震性能,对3片高宽比为0.95的试件进行水平加载试验。试件呈剪切破坏;端部纵筋、竖向分布钢筋以及钢骨翼缘压曲,钢骨腹板出现塑性铰线。端部钢骨能够提高剪力墙的抗剪承载力,但对试件的塑性变形能力影响不大。据此提出钢骨混凝土剪力墙的受剪承载力计算式,计算结果与试验结果吻合较好。

【Abstract】 To study seismic behavior of SRC low shear walls with high axial force ratio lateral loading experiment of three shear wall specimens with aspect ratio of 0.95 was carried out.Shear failure occurred on all specimens.The longitudinal reinforcements at the wall ends and the distributed vertical reinforcements were buckled.The flanges of the structural steel buckled and the plastic hinge lines were observed on the web.The structural steel increased the shear bearing capacity of specimens.The influence of the structural steel area on the plastic deformation of specimens was not obvious in this test.A shear bearing capacity formula of SRC shear wall was proposed and the calculated results had good agreement with the test results.

【基金】 国家科技部科研院所技术开发研究专项资金资助基金项目
  • 【文献出处】 工业建筑 ,Industrial Construction , 编辑部邮箱 ,2007年06期
  • 【分类号】TU398.9
  • 【被引频次】62
  • 【下载频次】429
节点文献中: 

本文链接的文献网络图示:

本文的引文网络