节点文献

聚乙烯中空纤维膜制备及微孔结构的控制

Preparation and structural control of polyethylene hollow fiber membranes

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 奚振宇杜春慧徐又一朱宝库

【Author】 XI Zhen-yu,DU Chun-hui,XU You-yi,ZHU Bao-ku(Department of Polymer Science & Engineering,Zhejiang University,Hangzhou 310027,China)

【机构】 浙江大学高分子科学研究所浙江大学高分子科学研究所 浙江杭州310027浙江杭州310027

【摘要】 通过熔纺-拉伸(MS)法制备了聚乙烯(PE)中空纤维微孔膜,并研究了纺丝牵伸比、拉伸速率及拉比率等对膜结构和性能的影响。研究结果表明PE中空纤维的结晶度和弹性回复率(ER,%)随纺丝牵伸比的增加而增大,且随着纺丝牵伸比的增大,PE中空纤维膜的微孔结构也增大;拉伸工艺对膜的结构和性能也有很大的影响,随着拉伸速率和拉伸比率的增加,PE中空纤维膜的透气率和孔隙率均增加。

【Abstract】 Microporous polyethylene(PE) hollow fiber membrane was prepared by melt spinning-stretching(MS) method.The structure and properties of the membranes were affected by the spin-draw ratio,stretching rate and ratio.The results showed that the crystallinity and elastic recovery(ER%) of PE hollow fibers,and the pore size of the PE membrane all increased with the spin-draw ratio.Stretching process also had great effects on the microporous structure of PE hollow fiber membranes,it was indicated that the N2 permeation and porosity of the membranes both increased with the increases of stretching rate and ratio.

【关键词】 聚乙烯中空纤维微孔膜透气率孔隙率
【Key words】 polyethylenehollow fiber membranepore sizeporosity
【基金】 国家重点基础研究发展计划(973计划)资助项目(2003CB615705);国家自然科学基金重点资助项目(50433010)
  • 【文献出处】 功能材料 ,Journal of Functional Materials , 编辑部邮箱 ,2007年02期
  • 【分类号】TQ325.12
  • 【被引频次】9
  • 【下载频次】632
节点文献中: 

本文链接的文献网络图示:

本文的引文网络