节点文献

杂铜中贵金属分析的制样方法

Sampling for analyses of precious metals in miscellaneous copper

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 林海山戴凤英岳伟陈小兰李小玲施平肖红新

【Author】 LIN Hai-shan1,2,DAI Feng-ying2,YUE Wei2,CHEN Xiao-lan2,LI Xiao-ling2,SHI Ping2,XIAO Hong-xin2(1.Institute of Material Science and Engineering,Central South University,Changsha 410083,China;2.Analytic Testing Research Center under Guangzhou Research Institute of Non-Ferrous Metals,Guangzhou 510651,China)

【机构】 中南大学材料科学与工程学院广州有色金属研究院分析测试中心广州有色金属研究院分析测试中心 湖南长沙410083广东广州510651

【摘要】 研究了杂铜中贵金属分析样品加工粒度与样品代表性的关系,及磨样时间对样品氧化的影响.结果表明,样品在磨样机内研磨不超过10min不会影响金、钯的含量,粒度为95%-1.6mm的样品具有良好的均匀性和代表性.采用本法制取的样品,其金、钯分析结果的相对标准偏差小于2%.

【Abstract】 The influence of sizes of samples on analysis of gold in miscellaneous copper as well as the effect of the grinding time on oxidation have been studied.The results show that there is no influence on content of gold and palladium when the sample is grinding without exceeding 10min in sample grinder.The sample with particle size of 95%-1.6mm is characterized by a good uniformity and representativeness.The relative standard deviation for analysis of gold and palladium with the method of this paper is less than 2%.

【关键词】 杂铜制样贵金属
【Key words】 miscellaneous coppersampling methodprecious metals
  • 【文献出处】 材料研究与应用 ,Materials Research and Application , 编辑部邮箱 ,2007年01期
  • 【分类号】TG115.3
  • 【被引频次】3
  • 【下载频次】90
节点文献中: 

本文链接的文献网络图示:

本文的引文网络