节点文献

预测轨迹修正单检测型复合轴控制方法

Single detector compound axis control based on realtime predicted trajectory correcting method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王强傅承毓陈科汪红熳

【Author】 WANG Qiang1, 2,FU Cheng-yu1,CHEN Ke1,WANG Hong-man1 ( 1. The Institute of Optics and Electronics, the Chinese Academy of Sciences, Chengdu 610209, China; 2. Graduate School of the Chinese Academy of Sciences, Beijing 100039, China )

【机构】 中国科学院光电技术研究所中国科学院光电技术研究所 四川成都610209中国科学院研究生院北京100039四川成都610209

【摘要】 提出并实现了基于实时预测轨迹修正的单检测型复合轴控制方法。利用一个目标探测与处理系统即可同时实现粗、精跟踪闭环。在目标提取困难时可有效提高跟踪可靠性,降低了光电跟踪设备对探测器的探测能力的苛刻要求及高度依赖性,同时,降低了粗精跟踪控制器带宽匹配的要求。本文在对比一般单检测型复合轴控制方法的基础上给出了实时轨迹修正单检测型复合轴控制方法的原理,速度修正所使用的预测滤波方法,以及跟踪实验结果。实验结果表明了该方法的有效性和可靠性。

【Abstract】 A new tracking algorism for single detector compound axis was presented and realized based on realtime trajectory correcting. Only one target detector system was needed for two-axis close loop control, which improved tracking reliability and degraded the requirements for the detective ability of CCD system. Precise results could be obtained even though CCD system hardly detected target in short time. The principle of realtime trajectory correcting single detector compound axis control in photoelectric tracking system was introduced through comparison between this method and common single detector compound axis control track method. The Experiment result verifies the effectivity and reliability of the method.

【基金】 国家863高技术项目
  • 【文献出处】 光电工程 ,Opto-Electronic Engineering , 编辑部邮箱 ,2007年04期
  • 【分类号】TP273
  • 【被引频次】18
  • 【下载频次】256
节点文献中: 

本文链接的文献网络图示:

本文的引文网络