节点文献

基于XC2S150E的MP网络电话的实现

Realization of MPnet Telephone Based On XC2S150E

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 吴翔唐焕华刘锦高

【Author】 WU Xiang,TANG Huan-hua,LIU Jin-gao(Department of Electronic Science,East China Normal University,Shanghai 200062,China)

【机构】 华东师范大学电子科学技术系华东师范大学电子科学技术系 上海200062上海200062

【摘要】 利用媒体网的电话系统相当于一个机顶盒,留有电话接口和网口,家用电话插上后可以利用MP网拨打电话.在拓扑上处于Medianet骨干网与用户的连接处,属于接入网部分.整个系统由电话控制芯片,编解码芯片和FPGA整体控制组成,遵循8kbyte/s的速率对语音信号采样并在下行用100M网口(RJ45)与MP设备(M-BOX)连接.基于MP网络的电话系统数据不做存储,而是直接打包成协议格式发送出去保证实时性.由于不使用IP网络,故未采用TCP/IP协议,而用FPGA按MP网专用协议组包.系统测试比对传输前后数据,仿真图正确.

【Abstract】 The telephone system as a STB has telephone interface and network interface,a phone call can be made while it entered the MPnet.It is in the connection of backbone MPnet and the users in analysissitus,so the system belongs to the section of connecting network.The whole project is made up of a SLIC,codec chip and FPGA.The sample rate of voice is 8 kB/s and a 100 M net port(RJ45) connects with MP device(M-BOX) which will send the data.There needs no power server for MPnet but broad bandwidth.For basing on Mpnet,it works on MP protocol instead of IP.The figures in system test contrasts the data to be transmitted and received.

【关键词】 网络电话XC2s150EMP网端对端CRC校验
【Key words】 VoIPXC2s150EMPEnd-to-EndCRC
  • 【文献出处】 电子器件 ,Chinese Journal of Electron Devices , 编辑部邮箱 ,2007年03期
  • 【分类号】TN916.2
  • 【下载频次】30
节点文献中: 

本文链接的文献网络图示:

本文的引文网络