节点文献

开孔泡沫铝压坑力学行为研究

Investigation on indentation deformation mechanical behavior of open-cell aluminum foams

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张章程和法黄笑梅项萍李拥军

【Author】 ZHANG Zhang ,CHENG He-fa ,HUANG Xiao-mei,XIANG Ping(College of Material Science and Engineering, Hefei University of Technology,Hefei 230009,China)

【机构】 合肥工业大学材料科学与工程学院合肥工业大学材料科学与工程学院 安徽合肥230009安徽合肥230009

【摘要】 分别采用头部为平面、球面和圆锥面的三种圆柱体压头,对泡沫纯铝和泡沫铝-硅合金进行了准静态压坑试验,研究不同性质的基体泡沫铝的压坑变形力学行为,探讨压坑变形的微观机制。结果表明:不同形状压头的压坑载荷-位移响应特征均与单轴压缩的响应相比均有较大差别,其显著特征是随着变形量的增大应力上升的速度较快,泡沫铝的压坑载荷-位移曲线的形状还与所用压头的形状密切相关;随着泡沫铝基体性质的不同,其压坑变形宏观形态和微观机制也存在较大的差异。

【Abstract】 The quasi-static indentation experiments of the pure aluminum foams and the Al-Si alloy foams were carried on using three types of indenter with different end geometries,i.e.flat-ended punch(FEP),spherical-ended punch(SEP) and conical-ended punch(CEP),respectively.Indentation deformation mechanical behavior of open-cell aluminum foams with different matrixes was investigated.And the deformation mechanism of the foams was discussed.The results show that the indentation load-displacement response of the foams is much different from that under quasi-static uniaxial compressive.The distinct character of the response is that the stress increases as deformation increasing rapidly.Moreover,the shape of the indentation load-displacement curves of the foam closely depends on the shape of the indenters.Otherwise,as the foams have different matrixes,the indentation macroscopic deformation modality and the indentation microcosmic deformation mechanism of the foams have great difference.

【关键词】 泡沫铝铝合金力学性能压坑
【Key words】 aluminum foamaluminum alloymechanical propertyindentation
【基金】 安徽省自然科学基金资助项目(050440202)
  • 【文献出处】 兵器材料科学与工程 ,Ordnance Material Science and Engineering , 编辑部邮箱 ,2007年04期
  • 【分类号】TG146.21
  • 【被引频次】2
  • 【下载频次】139
节点文献中: 

本文链接的文献网络图示:

本文的引文网络