节点文献

长纤维增强聚乙烯复合材料的研究

STUDY ON LONG FIBRE REINFORCED POLYETHYLENE COMPOSITE

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张宁李忠恒陶宇赖铭陶国良

【Author】 Zhang Ning, Li Zhongheng, Tao Yu, Lai Ming, Tao Guoliang (Department of Materials Science and Engineering, Jiangsu Polytechnic University, Changzhou 213164, China)

【机构】 江苏工业学院材料科学与工程系江苏工业学院材料科学与工程系 常州213164常州213164

【摘要】 采用经KH-550偶联剂处理的长玻璃纤维(LGF)与聚乙烯(PE)复合制备了PE/LGF复合材料。研究了该种复合材料的力学性能和LGF在PE基体中的分布状况。结果表明,LGF的长度与含量对复合材料的拉伸强度、冲击强度、硬度及维卡软化点温度有很大的影响,当LGF的质量分数约为30%、长度约为35mm时,复合材料的拉伸强度达52.5MPa,冲击强度达52kJ/m2,洛氏硬度为90,维卡软化点温度为106℃;LGF在PE基体中呈现三维交叉结构,这种结构和KH-550的加入改进了复合材料的性能。

【Abstract】 A series of long glass fibre (LGF) reinforced polyethylene (PE) composites were prepared using LGF treated by KH-500.The mechanical properties and the fibre distribution of composites were investigated.Results showed that the fibre length and mass content had great influences on tensile strength, impact strength, hardness and softing point. The tensile strength of the composite reached 52.5 MPa, the impact strength reached 52 kJ/m2, harness reached 90 and softing point reached 106℃ when the fibre length was 35 mm and LGF mass content was 30%. The long fibre distribution in matrix was three-dimensional cross structure, and this structure and KH-500 could improve the properties of composites.

【关键词】 聚乙烯长玻璃纤维增强复合材料
【Key words】 polyethylenelong glass fibrereinforcingcomposite
  • 【文献出处】 工程塑料应用 ,Engineering Plastics Application , 编辑部邮箱 ,2007年01期
  • 【分类号】TQ327.1
  • 【被引频次】24
  • 【下载频次】497
节点文献中: 

本文链接的文献网络图示:

本文的引文网络