【摘要】 采用Pro/Engineer建立增压机工作装置参数化实体模型,以此为基础,建立运动学模型,对工作装置进行运动仿真.首先将模型的连杆部分导入Ansys分析软件进行有限元受力分析,然后将活塞和连杆部分通过Pro/E和Adams之间的无缝接口软件Mechanical/Pro导入Adams软件中进行动力学分析,得出其在多种情况下的运动曲线,各项数据基本上达到了实际的要求.更多还原

【Abstract】 In this paper,the parametric model of the supercharge device is set up by Pro/E,based on this,the kinematics model is built,and the working device is simulated.First,the connecting rod of the model is done finite element analyzed by the Ansys software.Then with Mechanical/Pro,which is a seamless connected software between Pro/E and Adams,the piston and the connecting rod which constructed by Pro/E are received dynamics analyzed by Adams,and sport curves in many kinds of cases have been got,and every data are reached the actual requirements basically.更多还原