节点文献

CuO+TiO2复相添加剂对氧化铝陶瓷烧结性能和显微结构的影响及其烧结动力学分析

Liquid-Phase-Sintering of Alumina and the Sintering Kinetic Analysis

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘于昌黄晓巍

【Author】 Liu Yuchang Huang Xiaowei(Dept. of Materials Science and Engineering, Fuzhou University, Fuzhou 350002)

【机构】 福州大学材料科学与工程学院福州大学材料科学与工程学院 福州350002福州350002

【摘要】 研究了CuO+TiO2复相添加剂对氧化铝陶瓷烧结性能,显微结构的影响以及形成液相时氧化铝陶瓷烧结动力学。添加剂的加入极大的促进了氧化铝陶瓷的烧结。当CuO与TiO2质量比为1∶2的时候,氧化铝样品致密度最高。液相含量对致密度有明显影响,液相含量越高,烧结速率越快。添加剂的存在使氧化铝晶粒细化,晶粒形貌为等轴状。利用等温烧结的实验方法研究了烧结动力学,结果表明,是由氧离子和铝离子的扩散作用控制了烧结过程。

【Abstract】 The effect of codopant CuO+ TiO2 on the sintering and microstructure of alumina ceramics and the sintering kinetics during liquid- phase- sintering were investigated. The dopants significantly enhanced densification and when the mass ratio of CuO/TiO2 was 1/2, alumina ceramics obtained highest relative density. The densification rate increased significantly with increasing liquid volume content. The dopants made the grains fine and the grain size was equiaxed. The sintering kinetic was investigated through isothermal sintering and the results indicate that the densification maybe controlled by diffusion of Al3+ and O2- in the liquid phase.

【基金】 福州大学科技发展基金资助项目(2003-XQ-02).
  • 【文献出处】 现代技术陶瓷 ,Advanced Ceramics , 编辑部邮箱 ,2006年01期
  • 【分类号】TQ174.1
  • 【被引频次】16
  • 【下载频次】612
节点文献中: 

本文链接的文献网络图示:

本文的引文网络