【摘要】 目的研究高温高压消毒对不同桩挠曲强度与弹性模量的影响。方法采用北京实德隆碳纤维桩、玻璃纤维桩、石英纤维桩、Tenax玻璃纤维桩、Anthogyr钛桩各12支,分别分为实验组和对照组,每组6支。实验组经MelagVacuklav 24B消毒仪134℃高温、2.2 MPa高压消毒50 min,对照组不进行消毒。采用三点加荷系统测定其弹性模量和挠曲强度,并对其差异进行统计分析。结果两组内的实德隆碳纤维桩、玻璃纤维桩、石英纤维桩、Tenax玻璃纤维桩的弹性模量值与挠曲强度值彼此间无统计差异(P>0.05),Anthogyr钛桩获得了最高的弹性模量值与挠曲强度值(P<0.05);两组间经配对t检验无统计学差异(P>0.05)。结论纤维桩具有满足临床使用的挠曲强度,而其弹性模量显著低于金属桩,可以缓冲载荷,保护牙体组织,防止根折,成为桩材料发展方向。高温、高压消毒对纤维桩和钛桩的弹性模量和挠曲强度无显著影响,可用于桩的临床消毒。更多还原

【Abstract】 Objective To research the influence of autoclave sterilization on elastic module and flexural strength of five types of posts.Methods Shidelong carbon,glass and quartz fiber post,tenax glass fiber post and Anthogyr titanium post were chosen,and all the samples were divided into two groups which included five subgroups according to the model of posts,each subgroup including six samples.Experimental groups were autoclave sterilized(50 min at 134℃ and 2.2MPa),While the control groups were not.With three point loading system,elastic module and flexural strength of all the samples were measured.Results were statistically analyzed to find the difference between them.Results There was no statistical difference between Shidelong carbon,glass,quartz fiber post and Tenax glass fiber post in elastic module and flexural strength in both experimental group and control group,while Anthogyr titanium post gained the highest elastic module and flexural strength.Paired-samples t test also showed there was no statistical difference between experimental group and control group in elastic module and flexural strength.Conclusion Fiber posts perfectly meet the need of clinical use on flexural strength.Furthermore,with elastic module similar to dentin and much lower than metal posts,fiber posts will help to protect the remaining tooth structure from fracture.Autoclave sterilization has a little influence on elastic module and flexural strength of posts,which allows practitioners to systematically sterilize the posts in clinic.更多还原