节点文献

以次磷酸钠为还原剂化学镀铜的电化学研究

Electrochemical Study on Electroless Copper Plating Using Sodium Hypophosphite as Reductant

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨防祖杨斌陆彬彬黄令许书楷周绍民

【Author】 YANG,Fang-Zu YANG, Bin LU, Bin-Bin HUANG, Ling XU, Shu-Kai ZHOU, Shao-Min (State Key Laboratory of Physical Chemistry of the Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, P. R. China)

【机构】 厦门大学化学化工学院化学系固体表面物理化学国家重点实验室厦门大学化学化工学院化学系固体表面物理化学国家重点实验室 福建 厦门 361005福建 厦门 361005

【摘要】 通过电化学方法研究了以次磷酸钠为还原剂,柠檬酸钠为络合剂的化学镀铜体系.应用线性扫描伏安法,检测了温度、pH值、镍离子含量对次磷酸钠阳极氧化和铜离子阴极还原的影响.结果表明,升高温度能够加速阳极氧化与阴极还原过程;pH值的提高可促进次磷酸钠氧化,但抑制铜离子还原;镍离子的存在不仅对次磷酸钠的氧化有强烈的催化作用,而且与铜共沉积形成合金.该合金有催化活性,使化学镀铜反应得以持续进行.

【Abstract】 The process of electroless copper plating, using sodium hypophosphite as the reductant and sodium citrate as the chelating agent, was studied using linear sweep voltametry. The effects of temperature, pH, and concentration of nickel ion on the anodic oxidation of hypophosphite and the cathodic reduction of copper ion were tested. The results indicated that the higher ultrasonic bath temperature accelerated both the anodic and the cathodic processes. The increasing pH value promoted hypophosphite oxidation, whereas it blocked the reduction of the copper ion. The nickel ion not only intensively catalyzed the hypophosphite oxidation, but also codeposited with the copper ion to form the Cu-Ni alloy. With regard to its catalytic activity, this alloy enabled the continuation of the electroless copper plating reaction.

【基金】 国家科技攻关计划项目(2004BA325C)资助
  • 【文献出处】 物理化学学报 ,Acta Physico-Chimica Sinica , 编辑部邮箱 ,2006年11期
  • 【分类号】TQ153.14
  • 【被引频次】48
  • 【下载频次】1112
节点文献中: 

本文链接的文献网络图示:

本文的引文网络