节点文献

表面式FBG应变传感器在结构试验中的应用

Application Research on Surface FBG Sensor in Structure Experiment

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 朱健卢哲安戴绍斌梁磊

【Author】 ZHU Jian~1,LU Zhe-an~2,DAI Shao-bin~2,LIANG Lei~3(1.School of Civil Engineering and Architecture,Wuhan University of Technology,Wuhan 430070,China;2.Hubei Key Laboratory of Roadway,Bridge & Structure Engineering,Wuhan University of Technology,Wuhan 430070,China;3.State Key Industrial Test Base of Fiber Sensor,Wuhan University of Technology,Wuhan 430070,China)

【机构】 武汉理工大学土木工程与建筑学院武汉理工大学道路桥梁与结构工程湖北省重点实验室武汉理工大学光纤传感技术中心 武汉430070武汉430070

【摘要】 在钢梁与混凝土墙连接节点抗震性能的试验研究中,于钢梁翼缘同一测点处同时布置了表面式FBG应变传感器和电阻应变片进行应变采集,测量结果显示,两者的测量效果基本一致,同时表面式FBG应变传感器还具有使用便捷,不易损坏的优点,因此在结构试验中采用表面式FBG应变传感器测量构件的表面应变是完全可行的。

【Abstract】 In the experiment of the behavior of theconnection between steel beam and concrete wall,surface FBG sensor and resistance strain gauge were located at the same measuring point of the flange girth of the steel beam.Measuring results show that the measuring effectiveness of both methods are uniform.And the surface FBG sensor has the merits of using conveniently and non-vitiating.So using surface FBG sensor to measure the surface strains of structural members in structure experiment is feasible.

【基金】 湖北省自然科学基金(2005ABA284)
  • 【文献出处】 武汉理工大学学报 ,Journal of Wuhan University of Technology , 编辑部邮箱 ,2006年04期
  • 【分类号】TU317
  • 【被引频次】8
  • 【下载频次】212
节点文献中: 

本文链接的文献网络图示:

本文的引文网络