节点文献

含钼低碳微合金化钢连续冷却过程相变动力学研究

Study on kinetics of phase transformation in the process of continuous cooling for Mo bearing low carbon micro-alloyed steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 孔君华郑琳谢长生

【Author】 KONG Jun-hua~1,ZHENG Lin~1,XIE Chang-sheng~2(1.Technology Center of WISCO,Wuhan 430080,China;2.Materials Science and Engineering College,Huazhong University of Science & Technology,Wuhan 430074,China)

【机构】 武钢技术中心华中科技大学材料科学与工程学院 湖北武汉430080湖北武汉430080湖北武汉430074

【摘要】 在热模拟试验机上采用膨胀法并结合金相组织观察,测定了含钼和不含钼的试验钢贝氏体转变CCT曲线。研究了超低碳微合金化钢中钼元素对形变奥氏体连续冷却转变过程相变动力学的影响,结果表明,钢中加入w(Mo)0.4%后,明显降低贝氏体的析出温度,并得到更细小的贝氏体组织;同时在相同的冷速条件下形成的M(马氏体)岛状组织也更加细小弥散;形变奥氏体在连续冷却过程中即使在冷速较低情况下也能获得细小的贝氏体组织。

【Abstract】 The CCT curve of the bainite transformation of the Mo bearing and Mo free trial steel has been measured and the metallographic structure of the steels observed by expansion method in a thermo-simulation machine.The effect of Molybdenum element in the extra low carbon micro-alloyed steel on the kinetics of phase transformation of the transformed Austenite in the process of continuous cooling transformation has been studied.Results show that the precipitate temperature for the bainite apparently dropped down and finer bainite structure appeared as soon as 0.4% Molybdenum was added in the steel and in the meanwhile the island-shaped Martensite structures occurring in the similar cooling speed were even finer and diffused.The Austenite can be transformed into fine Bainite even if the cooling speed is relatively lower in the process of continuous cooling.

【关键词】 微合金化钢相变动力学
【Key words】 molybdenummicro-alloyed steelphase transformationkinetics
  • 【文献出处】 武钢技术 ,Wuhan Iron and Steel Corporation Technology , 编辑部邮箱 ,2006年04期
  • 【分类号】TG113
  • 【被引频次】17
  • 【下载频次】295
节点文献中: 

本文链接的文献网络图示:

本文的引文网络