节点文献

固体脉冲推力器羽烟粒度分布检测

Measurement of particle distribution in the solid impulsive thruster exhaust plume

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 周海清尤政张平

【Author】 ZHOU Hai-qing~1,YOU Zheng~1,ZHANG Ping~2(1.Dept.of Precision Instruments and Mechanology,Tsinghua Univ.,Beijing 100084,China;2.School of Electron-Mechanical Engineering,Beijing Inst.of Technology,Beijing 100081,China)

【机构】 清华大学精密仪器与机械学系北京理工大学机电工程学院 北京100084北京100084北京100081

【摘要】 为进行固体脉冲推力器点火启动过程的颗粒传热增强分析以及两相流动分析等研究的需要,采用MALVERN粒度分析仪和相应的辅助装置,检测了固体脉冲推力器排气羽烟中的颗粒粒度分布,得到了点火器燃烧产物和推进剂燃烧产物的颗粒粒度分布数据,检测结果表明,两种产物的颗粒粒度分布都呈多峰值分布状态,粒径范围为5~80μm,点火器燃烧产物的颗粒中间直径约为57μm;推进剂燃烧产物的颗粒中间直径约为39μm。

【Abstract】 To analyze the particle heat transfer enhancement in the ignition process and the two-phase flow of the solid impulsive thruster,particle distribution in the exhaust plume was measured with a MALVERN grading analyzer and corresponding assistant equipment.The particle distributions of the combustion products propellant were obtained.The results show that the particle distributions have multi-peaks and the particle diameters range from sum to 5~80μm.The media diameters of the combustion products are about 57μm and 39μm respectively.

  • 【文献出处】 推进技术 ,Journal of Propulsion Technology , 编辑部邮箱 ,2006年03期
  • 【分类号】V435
  • 【被引频次】5
  • 【下载频次】121
节点文献中: 

本文链接的文献网络图示:

本文的引文网络