节点文献

锅炉喷嘴用耐热钢的高温抗氧化性研究

Oxidation Research of Heat-resistant Steel Used to Boiler Nozzles

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 古可成蔡春波张华军陈鲁铁梁伟

【Author】 GU Ke-cheng1,CAI Chun-bo2,ZHANG Hua-jun 2,CHEN Lu-tie1,LIANG Wei1(1.Department of Material and Science Engineering,Shenyang University of Technology,Shenyang 110023,China;2.Department of Material and Science Engineering,Ha’erbin Univ.of Sci.& Tech.,Ha’erbin 150080,China)

【机构】 沈阳工业大学材料学院哈尔滨理工大学材料学院沈阳工业大学材料学院 辽宁沈阳110023黑龙江哈尔滨150080辽宁沈阳110023

【摘要】 以25-20耐热钢为基准,与几种自配锅炉喷嘴用奥氏体耐热钢在900℃及1050℃做了高温氧化对比试验。结果表明:Cr25Ni12Mn1Si2钢的抗氧化性接近25-20钢。用它代替25-20钢,可因Ni的加入量减少而带来明显的经济效益。并用扫描电镜对氧化膜做了初步的研究。

【Abstract】 Based on the 25-20 heat-resistant steel,the high temperature oxidation test of several austenitic heat-resistant steel used to boiler nozzles at 900℃ and 1 050℃were conducted.The results show that the oxidation resistance of Cr25Ni12Mn1Si2 steel is approximate to the 25-20 steel,and bring obvious economical benefit as a substitute for 25-20 steel due to reduction of Ni adding amount.Oxide film on the sample was studied by SEM.

  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2006年08期
  • 【分类号】TG179
  • 【被引频次】2
  • 【下载频次】202
节点文献中: 

本文链接的文献网络图示:

本文的引文网络