节点文献

基于静沉试验的给水厂污泥重力浓缩池的设计探讨

Design of gravitational sludge thickener in waterworks based on static settling experiment

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 谢敏施周李冬梅李淑展邓军

【Author】 Xie Min,Shi Zhou,Li Dong-mei,Li Shu-zhan,Deng Jun (Department of Water Engineering and Science,College of Civil Engineering, Hunan University,Changsha 410082,China)

【机构】 湖南大学土木工程学院水工程与科学系湖南大学土木工程学院水工程与科学系 长沙410082长沙410082

【摘要】 根据实测得到的静态沉降曲线讨论迪克理论和柯伊-克里维什理论在给水厂污泥重力浓缩池设计中的应用。运用迪克理论时,考虑与不考虑排泥固体通量,所得的总固体通量最小值分别为195kg/(m2·d)和49kg/(m2·d),差别很大。结合给水厂污泥浓缩池的实际工作情况,设计时宜采用保守设计,即不考虑排泥固体通量的影响。运用柯伊-克里维什理论时,浓缩要达到的目标浓度的取值应根据脱水机械对进泥浓度的要求来确定。

【Abstract】 The theories of Dick and Coe-Clevenger were applied for design of gravitational sludge thickeners in waterworks based on the settling curve obtained by static settling experiment.The calculated minimum values of total solid flux are very different in cases when the discharged solid flux(DSF)of the thickener was taken into consideration or not,for our situation they are 195 kg/(m2·d)and 49 kg/(m2·d)respectively.Moderate design might be appropriate for the practical operation of thickeners in waterworks,so the effect of DSF was ignored.When the Coe-Clevenger theory was applied,the value for the target concentration of the thickener output should be determined according to the requirements of the dewatering machine.

【关键词】 给水厂污泥浓缩池面积深度设计
【Key words】 WaterworksSludgeThickenerAreaDepthDesign
【基金】 科技部国际合作项目(2003DFB00002);中国博士后基金(20060390869);湖南省重点科技项目(03WHY1001)。
  • 【文献出处】 给水排水 ,Water & Wastewater Engineering , 编辑部邮箱 ,2006年12期
  • 【分类号】TU991
  • 【被引频次】3
  • 【下载频次】561
节点文献中: 

本文链接的文献网络图示:

本文的引文网络