节点文献

12Cr1MoV钢多道次轧制相变工艺的研究

Study on multi-pass rolling transformation technique in steel 12Cr1MoV

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈洪彬李庆芬杨尚林刘相华王国栋

【Author】 CHEN Hong-bin1,2,LI Qing-fen1,Yang Shang-lin1,LIU Xiang-hua3,WANG Guo-dong3(1Harbin University of Engineering,Harbin 150001,China)(2Harbin University of Science Technology,Harbin 150080,China)(3State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004,China)

【机构】 哈尔滨工程大学东北大学轧制技术与联轧自动化国家重点实验室东北大学轧制技术与联轧自动化国家重点实验室 哈尔滨150001哈尔滨理工大学哈尔滨150080哈尔滨150001沈阳110004

【摘要】 在Gleeble1500热模拟实验机上进行压缩实验,通过改变压下量、应变速率和冷却速率研究应变诱导相变的规律。研究表明,铁素体随变形量的增加而增大,并且铁素体晶粒尺寸随变形量的增加而减小;铁素体随应变速率的升高而减少,并且晶粒随应变速率的升高而变小;铁素体随冷却速率的升高变化不大,但晶粒变小。

【Abstract】 The law of strain induced transformation was studied by changing strain value,strain rate and cooling rate.Compession test was performed by using thermal simulator Gleeble 1500.Results show that the ferrite incresased and the grain sizes decreased with increasing strain value.The ferrite decreased and the grain sizes also decreased with increasing strain rate.When cooling rate increased,the ferrite did not change too much,but the grain sizes decreased.

  • 【文献出处】 机械设计与制造 ,Machinery Design & Manufacture , 编辑部邮箱 ,2006年01期
  • 【分类号】TG335.1
  • 【被引频次】2
  • 【下载频次】233
节点文献中: 

本文链接的文献网络图示:

本文的引文网络